About Us

About Our Richmond Metal Roof Coating Work

Inspection First, Repairs Next, and the Coating Last

Here is the short version about our Richmond metal roof coating work: we inspect, repair what is failing, and then coat the roof.

Roofer walking a commercial metal roof with the building owner in Richmond, IN
Roofer cleaning a metal panel seam and priming rust before coating in Richmond, IN

What to Know About Our Richmond Metal Roof Coating Work

Most questions about our Richmond metal roof coating work come down to order. The roof gets inspected before anything is priced, failing panels and screws get fixed before primer, and the coating goes on last at a measured thickness.

That order keeps the coating from covering a problem. A coat over a holed panel or wet insulation hides the failure instead of stopping it.

  • Written scope before work is booked
  • Repairs listed line by line
  • Film thickness checked during application
  • Final roof walk with the owner
Roofing crew spraying coating across a commercial metal roof in Richmond, IN

Want a Second Look at a Coating Quote?

Bring the scope you have. We will walk the roof and tell you what we would change and why.

Get A Free Estimate

What Our Roof Inspection Covers

Every inspection checks these before we write a scope.

  • Screw condition along every panel line
  • Side laps and end laps for gaps and old sealant
  • Rust depth at eaves, laps, and gutters
  • Drains, scuppers, and gutters for flow
  • Curbs, vents, and skylights for open flashing
  • Soft or wet insulation and deck areas
  • Ceiling and wall stains inside the building
  • Safe roof access and staging space

What We Coat, What We Fix First, and What We Pass On

Some roofs coat right away, some need repairs first, and some should be replaced.

What We Install

We Coat

Panels
Solid steel with surface rust
Insulation
Dry and firm
Shingles
Flat and holding granules
Drainage
Water leaves within a day or two
Compare

We Fix First

Panels
Scattered holed sheets
Insulation
Small wet areas cut out
Shingles
A few loose tabs
Drainage
Clogged drains or gutters
Compare

We Pass On

Panels
Holes across most of the roof
Insulation
Wet across large areas
Shingles
Curling, brittle, or bare
Drainage
Structural sag that holds water

Talk With Us About Our Richmond Metal Roof Coating Work

Questions about the process, a past quote, or your roof? Call or request an estimate.

Call (260) 517-5834